Removing And Reattaching The Side Cladding; Fig. 36: Side Cladding; Fig. 37: Front Headlight, Cable - Paravan PR 50 User Manual

12.2

Removing and reattaching the side cladding

The chassis cladding can be removed for maintenance, repair or
cleaning.
Take the following steps in the following sequence when removing and
reattaching the side cladding:
› Loosen and remove knurled screws .
› Remove rear cladding.
) )
See Section "12.1 Removing and reattaching the chassis clad-
ding"
› Raise the side cladding at rear.
› Disconnect the cable for the front headlight and directional indica-
tor  at the connection.
› Remove side cladding from the front.
› Reassemble in the opposite sequence.
L L
Make sure the plastic washers are present, as they protect the
chassis components from damage.
Removing and reattaching the chassis cladding


Fig. 36: Side cladding

Fig. 37: Front headlight, cable


71