12.
Removing and reattaching the chassis cladding
12.1
Removing and reattaching the rear cladding
Fig. 21: Rear cladding
Fig. 22: Rear light and cable
Removing and reattaching the chassis cladding
The chassis cladding can be removed for maintenance, repair or clean-
ing.
Take the following steps in the following sequence when removing and
reassembling the rear cladding:
>
Loosen and remove knurled screws .
L
Put aside the knurled screws and plastic washers.
>
Remove the rear cladding carefully.
>
Disconnect the cable for the rear light at the connection.
>
Reassemble in the opposite sequence.
55