13.3
Buckling the safety belt
Fig. 26: Fastening the seat belt
Fig. 27: Belt fastener
Driving your electric wheelchair
L
Listen for an audible clicking into place of the buckle latch
in the belt fastener when buckling the safety belt.
The function of the belt fastener is similar for all belt variants,
including:
>
2-point belt (lap belt).
>
3-point belt in driver or passenger version.
>
4-point belt (suspender belt).
>
Multipoint belt (special belt with several anchor points).
L
Note for the electrically lockable belt:
The electrically lockable belt is controlled by an electromagnet. It is
locked in switch position 0 & unlocked in switch position 1. The per-
manent current consumption in position 1 is approx. 0.5 A.
In general, only tilt the backrest in position 1 (unlocked)!
Otherwise the seat belt will tighten in position 0 (locked).
59