Setting The Foot Rest Angle - Paravan PR heavy duty User Manual

10.5.3

Setting the foot rest angle

Fig. 18: Foot rest angle
52
The angle of the foot rests can be set separately for each foot rest to
match your individual needs.
The following settings are available:
> Screw the adjustment screw inwards -> the foot rest is lowered.
> Screw the adjustment screw outwards -> the foot rest is raised.
L
Do not force the adjustment screw in or out. Raise the foot
rest a little to remove pressure on the adjustment screw.
Take the following steps in the following sequence when setting the
angle of the foot rest:
> Raise the foot rest .
> Loosen the lock nut .
> Screw the adjustment screw  in or out as required.
> Check your setting (lower the foot rest).
> Tighten the lock nut  to about 8 Nm.
Settings on your electric wheelchair; mechanical