Table of Contents
Advertisement
15.7
Securing the wheelchair in the docking station
Make sure that the legrests do not collide with the ramp or the docking station when entering the vehicle.
docking station.
>
1. Maneuver the wheelchair slowly and in a uniform direction over the docking station.
>
The locking plate under the wheelchair helps guide the wheelchair into the docking station.
When the locking plate is fully engaged in the docking station, a spring-loaded locking pin automatically
secures the locking plate.
>
2. The docking station is equipped with a control switch that indicates whether the lock plate is correctly
secured in the docking station. As soon as the lock plate comes into contact with the lock pin, a warning
tone (a high-pitched whine) sounds and the red diode/lamp (LED) in the control panel lights up until the
lock plate is either fully engaged or the wheelchair is removed from the docking station.
>
3. As a sign that the wheelchair is properly secured, the warning tone goes out, the red diode in the control
panel also goes out and the green diode lamp (LED) lights up.
>
4. Don't forget to buckle up to drive.
Loading and transporting your electric wheelchair
77
Advertisement
Table of Contents
