Table of Contents
Advertisement
iiiiii!:ii i
¸I III
¸!ii!!iiiii!!!iiiii!!! iiiii
Recording
Features
Specifying
recording
length
- One Touch
Timer
Recording
(OTR)
The One-touch
Timer
Recording
feature
provides
a
simple
and convenient
way to make a timed
recording.
EXAMPLE: One-touch Timer Recording for 30 minutes.
When a TV is connected with an audio/video cable, turn the
TV on and select the video input mode on the TV.
H
Load a cassette tape with the
erase prevention tab intact. The
clock display will change in the
counter display.
D
m
D
Press SP/EP to select the desired
tape speed SP or EP.
The counter and SPor EPwill
appear on the screen for about 4
seconds.
Pressthe Number keys or CH -/+
to select the channel to be
recorded.
The channel number will appear
on the screen and display for
about 4 seconds.
Press REC on the VCR or while
holding REC press PLAY ([7>) on
the Remote to begin recording.
Press REC on the VCR again to
stop recording after 30 minutes.
Each additional press of REC will
increase recording time as shown
in the chart below, up to a
maximum of 5 hours. The OTR
and recording time will appear on
screen for about 4 seconds.
NOTES:
00:00:00
SP 1
OTR 0 : 30
CH 125
• Press RECto increase
Press
Recording
time
the time needed for
once
NORMAL REC
recording (See the
twice
0:30
chart ).
3 times
1:00
• To cancel OTR, press
4 times
1:30
STOP (Iq) or turn off
5 times
2:00
6 times
3:00
the power.
7 times
4:00
8 times
5:00
9 times
NORMAL REC
Watching
one program
while
recording
another
During recording...
• If you connect the TV and the VCR only using the RF
connection to view pictures from the VCR, press TV/VCR
on the Remote so that VCR mode indicator goes off from
the display panel. (The TV broadcast being recorded
disappears.)
• If you are using the AV connection to view pictures from
the VCR, change the TV's input mode from AV to TV.
Then, select the channel you want to watch, on the TV.
Timer Recording
Timer recording
can be programmed
on-screen
with
the remote
control.
The built-in
timer allows automatic
unattended
recording
of up to 8 programs
within
l
month.
NOTES:
• After timer recording is completed, the VCR turns off
automatically.
• You can program the timer recording while a regular
recording is in progress; the menu screens will not be
recorded.
• The timer recording will start at 20 seconds before the time
you predetermined.
EXAMPLE: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: EP).
When a TV is connected with an audio/video cable, turn the
TV and this VCR on and select the video input mode on the
TV.
H
Press MENU on the Remote.
Check the "TIM ER RECSET"
option is selected, then press
ENTER.
m
Press SET -/+
to select one of
the program lines, then press
ENTER.
Press SET -/+ to select the
date, then press ENTER.
D
Set the start time, end time,
channel and tape speed as in
step 3.
e
m
NOTE: To record from external
source, press SET -/+
and set the channel to
"L". "L" will appear next
to CH 125 (or 69).
To enter other programs,
repeat step 2 through 4. Or,
press MEN U twice to return
to the normal screen.
Press TIMER on the Remote.
The power will go off, the
TIMER REC indicator (Fq) will
light and the VCR stands by
for recording.
I
ENU
1
I/CLOCK
SET
II TIMER
REC SET
I_,UTO
REPEAT
ON I_OFF
II CH SET UP
II SAP
ON I_OFF
II LANG UAG E/IDIOMA/LANGUE
II NO NOISE BACKGROUND
I_ON
OFF
(+/-/ENTER/MENU)
-2+_2/ENTE-RZ_NCiU_;E
U_
;;iiii iiiiii17
i_ENTER/ZNCEUMENUi
o,,E B,ART _NOOR I
26(8U)
11:00PM 11:30PM 125-
EP t--
.......
;--
-; .....
t \1
:::::::::::: :::::: ::[[:::: : :::::::
J
DATE
BTARTEND
CH
26 (..I_) %1 __0_ _O_PM__I"_0_P_I
_ __ _E d
-_:::-" -_i:s _-i-_: ":_':/
To use the VCR while it is in timer recording standby mode
Press TIMER. After you use the VCR, press TIMER again
to put the VCR into timer recording standby mode.
Advertisement
Table of Contents
