Table of Contents
Advertisement
30
Automa tic Sa tellite
Progra m m e Recording
This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver.
Connect a satellite receiver to the recorder's AV2 IN/DECODER connector and programme the timer on the satellite receiver; the
recorder starts recording when the signals input from the satellite receiver to the AV2 IN/DECODER connector, and when there is no
input signals the recorder stops recording and the power shuts off.
Satellite Receiver U nit
DECODER
Mains outlet
S-VIDEO OUT
Back of Recorder
IM PO RTAN T
When you set "AV2 SELECT" to "SAT" (
if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/ VCR on the remote control to turn off the VCR indicator on the display panel.
● In this case, be sure to set the
N O TE:
Refer to the instructions supplied with your satellite receiver.
Downloaded from:
https://www.usersmanualguide.com/
Outdoor Unit
Satellite Cable
VCR
TV
AV1 OUT
S OUT
AV1 IN/OUT
COMP. Y/C
AV2 IN/DECODER
AV1 OUT switch
pg. 40), it is possible to view a satellite broadcast with the TV set to its AV mode even
AV1 O U T switch on the rear panel to COMP .
AD VAN CED O PERATIO N S (cont.)
Aerial
S-VIDEO IN
connector
TV Aerial cable
connector
AUDIO IN
connectors
ANT. IN
RF OUT
SYNCHRO EDIT
JLIP
ANT. IN
L
AUDIO
OUT
R
PAUSE/R.A. EDIT
RF OUT
21-pin AV input
connector (SCART)
Back of TV
Aerial
Advertisement
Table of Contents
