Torque Requirements: 5500 Manifolds - Pepperl+Fuchs 7500 User Manual

5500-Man-CD01
56.6
12.7 22.2
22.2
*Dimensions shown in millimeters.
2.6.4

Torque requirements: 5500 Manifolds

Hardware
Screws, nuts, and sealing washer
Bulkhead fitting nut
Compression fitting tube end
Knurled nut (solenoid)
Plastic cable gland (solenoid)
Mounting screws (solenoid)
38.1 14.8
1/4-20UNC
9.5 (4x)
1/4-20UNC
0.375 (4x)
Torque
8.5 Nm (75.2 in-lbs)
40 Nm (350 in-lbs)
1 1/4 turns past finger tight
1.2 N-m (10.6 in-lbs)
Hand tight
Secure solenoid with screw. Do not over tighten!
7500 S M  P
erieS anual
24.1 14.6
3/8" NPT (2x)
23
53.3
d
roducT eScriPTion
73
37