Pressure Kit; Torque Requirements: Control Unit - Pepperl+Fuchs 7500 User Manual

2.3.6

Pressure Kit

The included pressure kit contains the following components:
z
Bulkhead fitting
z
O-ring
z
Tubing
z
Tubing inserts
z
Straight connector
z
Sintered element for bulkhead fitting
z
Panel hole size: 14.7 mm (37/64 inch)
z
2.3.7

Torque requirements: Control Unit

Hardware
Main lid
M4 screws for mounting bracket
Screws for mounting HUB
M12 plug
Panel mount bracket hardware
Set screws to mount control unit in panel
Wire terminal
Earth ground (Internal/External)
Bulkhead fitting nut
Compression fitting tube end
7500 S
erieS
Torque
1.35 Nm (12 in-lb)
1.35 Nm (12 in-lb)
1.35 Nm (12 in-lb)
1.70 Nm (15 in-lb)
Tighten evenly to a uniform gasket thickness of 1.3
mm to 1.7 mm
Tighten until control unit is touching metal-to-metal
around all edges
0.5–0.6 Nm
1.36 Nm (12 in-lb)
0.5 turns past finger tight (Do not overtighten!)
1-1/4 turns past finger tight
M  P d
anual roducT eScriPTion
17