Tools List; Bill Of Materials - Siemens SICHARGE D Product Information

Preparation

Tools list

Before starting work, ensure that all required tools, materials and lifting gear is available.
• Stepladder or other approved aids with a working height of at least 2.4 m
• Allen key size 2.5; 4; 5 mm
• Hexagon socket bit size 2.5; 4; 5 mm
• Ring wrench or open-ended wrench size 6; 7; 8; 10; 13; 19 mm
• Hexagon socket wrench insert long size 6; 7; 8; 10; 13; 19 mm
• Ratchet for socket wrench insert
• Torque wrench for 3 to 46 Nm
• Small cordless screwdriver with bit holder
• Grease-dissolving cleaning agent
• Cloth for cleaning
• Shears

Bill of materials

To install the cable management system on the SICHARGE D charging station, you will need the following materials.
Table 1 Materials for the installation
Quantity Description
1 Mounting plate left
1 Mounting plate right
1 Fan cover plate
1 Cover
1 Bridge
1 Bezel bracket left
1 Bezel bracket right
2 Nipple for bezel bracket
2 Rubber sphere
4 Cable clamp
2 Meander pin
50 cm Rubber adhesive tape, self-adhesive
on one side
4 M12x30 hexagon screw
10 M6x16 half-round hexagon socket-
head screw
8 M4x14 hexagon socket-head screw
4 M8 hexagon nut
4 M6 hexagon nut
10 M4 hexagon nut
Installation of the cable management system
A5E53160522-AA, 11/2023
Order number
8EM5902-1AA02-1AA7
8EM5902-1AA02-1AA8
8EM5901-1AA07-7AA1
8EM5902-1AA02-2AA2
8EM5901-1AA07-7AA0
8EM5901-1AA08-0AA8
8EM5901-1AA08-0AA7
8EM5904-0AA03-2AA8
8EM5901-1AA07-7AA3
8EM5902-1AA00-8AA3
8EM5901-1AA05-4AA2
8EM5901-2AA01-0AA4
-
-
-
-
-
-
Order designation
SICHARGE D cable Mgmt left
SICHARGE D cable Mgmt right
cover plate fan
AA cover hood
bridge
Rear bezel bracket left
Rear bezel bracket
Nippel-fuer-Federlasche
absorber sphere
Charging Cable Clamp
Meander Element CC
Cable Clamp Rubber Insert
-
-
-
-
-
-
79