Water Separator - TOHATSU BFT 80A Owner's Manual

Water Separator

WATER SEPARATOR
Water separator is located near by the
engine cover fixing lever of the boat
side. Water accumulation in the water
separator can cause loss of power or
hard starting. Check the water
separator periodically. Clean it or
consult with an authorized
TOHATSU outboard motor dealer for
cleaning.
Gasoline is extremely flammable,
and gasoline vapor can explode,
causing serious injury or death. Do
not smoke or allow flames or
sparks in your working area.
KEEP OUT OF REACH OF
CHILDREN.
• Always work in a well-ventilated
area.
• Be sure that any fuel drained
from the outboard motor is
stored in a safe container.
• Be careful not to spill fuel when
cleaning the water separator.
Spilled fuel or fuel vapor may
ignite. If any fuel is spilled, make
sure the area is dry before
starting the engine.
MAINTENANCE
<Cleaning>
FUEL TUBES SCREWS
SUSPENSION
STRAP
WATER SEPARATOR BRACKET
1. Remove the engine cover (see page
62).
2. Remove the suspension strap from
the water separator bracket, then
remove the strap from the separator
assembly.
During removal of the water
separator assembly, take care not
to damage the wire harness with
the water separator bracket.
WATER
SEPARATOR
145