TOHATSU BFT 80A Owner's Manual page 122

OPERATION
3. If the overheat warning system
stays activated, stop the engine. Tilt
up the outboard motor and check
the water intakes for
obstructions. If there are no
obstructions at the water intakes,
return to the closest boat landing
and contact your closest outboard
motor dealer.
120
COOLING WATER INTAKE PORT
(each side)
When the PGM-FI activated:
1. Consult with an authorized
TOHATSU outboard motor dealer.
When the ACG warning system is
activated:
1. Check the battery (see page 141).
If the battery is OK, consult with an
authorized TOHATSU outboard
motor dealer.
When the water separator buzzer
sounds:
WATER SEPARATOR
1. Check the water separator for
water contamination. If water is
accumulated, clean them (see page
145).