Table of Contents
Advertisement
CONTROLS AND FEATURES (Common)
When "Periodic Maintenance" is
indicated:
1. Have the periodic maintenance
performed without delay after
returning to port.
2. Reset the hour counter.
If not reset, the maintenance
indication will remain in the
display, and the hour count until the
next maintenance will be in error.
When the periodic maintenance is
conducted before "Periodic
Maintenance" is indicated, reset the
hour counter.
If not reset, the hour count until the
next maintenance will be in error.
52
How to reset the Hour Counter
1. Be sure to turn OFF the engine
before beginning the reset
procedure. Pull the emergency stop
switch clip out of the emergency
stop switch by pulling the
emergency stop switch lanyard.
2. Put the shift lever in "F" (Forward)
or "R" (Reverse).
3. Turn the ignition switch ON. Do
not start the engine. The buzzer
will sound once.
4. Press the emergency stop switch
5 times within 20 seconds.
When using the switch panel
without indicators type, within 20
seconds, pull and insert the
emergency stop switch clip, or
remove the clip and pull the
emergency stop switch 5 times.
The buzzer will sound once
indicating the hour counter is reset.
Advertisement
Table of Contents
