Amcrest AMDV5M32-6TB Quick Start Manual page 22

SMD (Smart Motion Detection)
Smart Motion Detection (SMD) uses an advanced algorithm to differentiate human and vehicular
shapes within a scene and send alarms only when a person or vehicle is detected. For more
information on how to setup SMD please refer to the information provided below.
1. Click on the SMD option located in the Parameters menu and verify the correct channel is being
used. Click on the Enable toggle switch to enable the feature.
2. Use the Sensitivity dropdown menu to select a motion sensitivity. Motion sensitivity can range
from low, medium, and high. Select an effective target (object filter) option (Human, Vehicle). Both
object filters can be enabled at the same time if needed.
3. Click Apply to save the SMD settings to the system.
Viewing a SMD Event
Any SMD data retained on the system can be viewed using the SMD Smart Search interface or
via the playback menu if an SMD schedule is set in the system. To learn more about recording
schedules, please refer to section "Setting Up Recording Schedules".
To view SMD data using the SMD smart search interface, click on the SMD option located in the
Smart Search menu. Enter a start and end time of the event and click Smart Search. A layout of
all SMD events will be displayed. To view the event, select the event f rom the interface and click
the play button next to the event in the interface.
Face Detection & Recognition
Face detection is used to allow your device to detect and record face image events. Face
recognition is used in conjunction with face detection to locate and determine facial similarities
detected by the system. Images are registered in a face library, by the user, and accessed via a
face recognition smart search tool that is built into the DVR.
Note: A USB flash drive with applicable facial images (in jpeg format) should be inserted
into a USB port on the DVR if you are importing images locally.
Setting up Face Detection
22