Amcrest AMDV5M32-6TB Quick Start Manual page 24

There are 2 methods of face recognition, common mode, and stranger mode. Common mode
allows the device to use the images registered in the face library as a reference to recognize
faces. Stranger mode will alert the system once an unrecognized face is detected.
Note: Common mode can only be setup locally on the DVR or by using Internet Explorer on a PC.
If using Face Recognition on other browsers, such as Google Chrome or Firefox, please use
Stranger Mode.
How to Use Common Mode
1. Click on the Face Recognition option in the Parameters menu and verify the correct channel
(camera) is being used. Click on the Enable toggle switch to enable the feature. Click on Apply.
2. Click on the Database option located in the AI menu then click on Add to begin registering
images to a face library. A face library must be registered for this feature to function properly.
Enter a name for your face library and click OK.
The library will now be saved to the database. Click on the Details section to begin adding images
into the face library.
If you have a single image to add click Register ID, if you have multiple images to add click on
Batch register. Follow the on-screen prompts to add the images into the library. Once the images
have been successfully modeled into the database right click on the interface to exit.
24