Making Single Operator Cc Weld Connections - Miller Big Blue 700 Duo Pro DLX SF Owner's Manual

5-13. Making Single Operator CC Weld Connections

Welder A (Left) Side
2
!
Stop engine.
NOTICE − Do not exceed machine duty
cycle.
.
Welder B (right) weld output terminals
are disabled in Single Operator mode.
Connect only to Welder A (left) termi-
nals for Single Operator mode opera-
tion.
.
Complete Parts List available at www.MillerWelds.com
.
Optional Weld Selector switch shown.
Direct Current Electrode Positive
(DCEP) connections are shown.
1
.
Use Single Operator mode for CC weld-
ing only. Welder B weld output terminals
are disabled in Single Operator mode.
(see Section 6-2).
.
See Section 5-14 for proper cable size.
1 Electrode Holder Cable
2 Work Cable
Welder B (right) Terminals
Inactive In Single Operator Mode
Tools Needed:
Ref. 251 340-A / Ref. 802 292-A
For Stick/TIG welding Direct Current Elec-
trode Positive (DCEP), connect work cable
to Negative (−) terminal and electrode hold-
er cable to Positive (+) terminal.
For Stick/TIG Direct Current Electrode Neg-
ative (DCEN), connect work cable to Posit-
ive (+) terminal and electrode holder cable
to Negative (−) receptacle.
.
Be sure Process Selector switch is set
correctly. See Section 6-3.
OM-252624 Page 39
3/4 in.