6-9. Oil Pan Heater
Notes
OM-252624 Page 48
.
Complete Parts List available at www.MillerWelds.com
1
Oil Heater Plug
Use heater to maintain a constant
engine oil temperature.
To turn on heater, connect heater
plug to 120 volts AC receptacle.
Heater rated at 300 watts.
!
Do not run engine while oil
pan heater is on.
NOTICE −In extremely cold weath-
er, heater should be connected to
120 volts AC receptacle when en-
gine oil is warm to eliminate possib-
ility of oil coking on heater.
Severe coking on heater element
may cause damage to engine, en-
gine oil, and oil pan heater.
!
The area near the the oil pan
heater gets hot.
Disconnect plug to turn off heater.
1
Oil Heater1 2012−05 907 520−1 / Ref. 803 145