ACME ARAS User Manual page 9

DMX State
Select the
(Blackout) or
menu mode without any change after 8 seconds. Back to the functions without any change press the
MENU button again.
Display Inverse
, press the ENTER button. Use the DOWN and UP button to select
Select the
Normal) or
mode without any change after 8 seconds automatically. Back to the functions without any change press
the MENU button again.
White Balance
Select the , press the ENTER button. use the DOWN and UP button to select
/ /
setup or automatically exit menu mode without any change after 8 seconds. To go back to the functions
without any change press the MENU button
Manual mode
Select the , press the ENTER button. Use the DOWN and UP button to select
RED(R000-R255)/
the brightness (d000-d255)or
button to setup or exit menu mode without any change after 8 seconds automatically. Back to the
functions without any change press the MENU button again.
Auto Test
, press the ENTER button. Use the DOWN and UP button to select
(Hold the last state) . Once selected, press the ENTER button to setup or exit
(Display Inverse). Once selected, press the ENTER button to setup or exit menu
, You can choose values between 125-255,and press the ENTER button to
GREEN(G000-G255)/ BLUE(B000-B255)/
strobe(S000-S255). Once selected, press the ENTER
8A
(Display
W(W000-A255)/