Table of Contents
Advertisement
Note
f Automatic setup of signal can be executed when analog RGB signal consisting of dots such as computer signal, or HDMI signal is being
input.
Adjusting position automatically
1)
Press as to select [AUTO SETUP].
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3)
Press as to select [POSITION ADJUST].
4)
Press qw to switch the item.
[ON]
[OFF]
Adjusting signal level automatically
1)
Press as to select [AUTO SETUP].
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3)
Press as to select [SIGNAL LEVEL ADJUST].
4)
Press qw to switch the item.
[OFF]
[ON]
Note
f [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.
[COMPUTER IN]
Set the <COMPUTER IN> terminal.
Setting [EDID MODE] in [COMPUTER IN]
1)
Press as to select [COMPUTER IN].
2)
Press the <ENTER> button.
f The [COMPUTER IN] screen is displayed.
3)
Press as to select [EDID MODE].
4)
Press the <ENTER> button.
f The [EDID MODE] screen is displayed.
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
f Proceed to Step 10) when [DEFAULT] is selected.
6)
Press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
7)
Press asqw to select [RESOLUTION].
f Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],
[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
Chapter 4 Settings — [DISPLAY OPTION] menu
Adjust the screen position and size when automatic setup is executed.
Does not perform automatic adjustment.
Does not perform automatic adjustment.
Adjusts black level (the [PICTURE] menu → [BRIGHTNESS]) and white level (the [PICTURE] menu
→ [CONTRAST]) when automatic setup is executed.
Standard setting.
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.
ENGLISH - 93
Advertisement
Table of Contents
