Table of Contents
Advertisement
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.
[FREE GRID]
Finer adjustment is possible by selecting the points or lines to be corrected.
For details of operation, refer to "Adjusting distortion with [FREE GRID]" ( x page 81).
Setting [CORNER CORRECTION]
1)
Press as to select [GEOMETRY].
2)
Press qw to select [CORNER CORRECTION].
3)
Press the <ENTER> button.
f The [GEOMETRY:CORNER CORRECTION] screen is displayed.
4)
Press as to select the item to adjust, and press the <ENTER> button.
f When [LINEARITY] is selected, press qw to select either adjustment method ([AUTO] or [MANUAL]).
Select [AUTO] normally.
For details of operation when [MANUAL] is selected, refer to "Adjusting to desired linearity" ( x page 80).
5)
Press asqw to adjust.
[UPPER LEFT]
[LINEARITY]
Horizontal direction
[FREE GRID]
Finer adjustment is possible by selecting the points or lines to be corrected.
For details of operation, refer to "Adjusting distortion with [FREE GRID]" ( x page 81).
Adjusting to desired linearity
1)
Press as to select [GEOMETRY].
2)
Press qw to select [CORNER CORRECTION].
3)
Press the <ENTER> button.
f The [GEOMETRY:CORNER CORRECTION] screen is displayed.
4)
Press as to select [LINEARITY].
5)
Press qw to select [MANUAL].
6)
Press the <ENTER> button.
f The [LINEARITY] screen is displayed.
7)
Press asqw to adjust.
80 - ENGLISH
Chapter 4 Settings — [POSITION] menu
[CURVED CORRECTION]
[CORNER CORRECTION]
[UPPER RIGHT]
[LOWER LEFT]
Vertical direction
[LOWER RIGHT]
Advertisement
Table of Contents
