Table of Contents
Advertisement
[Detail control] page
Click [Projector control] → [Detail control].
1
Control of the projector
The projector is controlled by clicking the buttons in the same way
as the buttons on the remote control. After control, the on-screen
display of the projector at the right of the control page is updated.
2
[SUB MEMORY]
Switches the sub memory.
3
[DAYLIGHT VIEW]
Switches the day light view setting.
4
[FREEZE]
Temporarily pauses the image.
5
[WAVEFORM MONITOR]
Displays the waveform of the input signal.
[Detailed set up]
[Network config] page
Click [Detailed set up] → [Network config].
1)
Click [Network config].
f Click [Network config] to display the [CAUTION!] screen.
2)
Select the item to change the setting.
f The [WIRELESS LAN] setting can be selected only when the optional Wireless Module (Model No.:
AJ-WM50 Series) is attached.
3)
Click [Next].
f The current settings are displayed.
4)
Click [Change].
f The setting change screen is displayed.
162 - ENGLISH
Chapter 5 Operations — Using the web control function
1
2
3
4
5
6
6
[PROJECTION METHOD]
Switches the setting of the projection method.
7
[OSD POSITION]
Switches the OSD position setting.
8
[GEOMETRY]
Switches the geometric adjustment setting.
9
[TEST PATTERN]
Displays the test pattern.
Click the test pattern to display in the projected image from the
patters displayed on the right side of the control page.
The display of the test pattern disappears if [Exit] is clicked.
10 [GET OSD]
Updates the on-screen display of the projector at the right of the
control page.
7
8
9
10
Advertisement
Table of Contents
