Table of Contents
Advertisement
Chapter 3 Basic Operations — Operating with the remote control
Avoid using images that include halftones or gradation, such as photographs and computer graphics.
button
1)
Press the <AUTO SETUP> button.
f [COMPLETE] is displayed when it has completed without any problem.
Note
f The clock phase may shift even if it has completed without any incident. In such a case, adjust the [POSITION] menu → [CLOCK PHASE]
( x page 78).
f If an image with blurred edges or a dark image is input, [INCOMPLETE] may appear or adjustment may not be performed properly even
when [COMPLETE] appears. In such a case, adjust the following settings.
g [ADVANCED MENU] menu → [INPUT RESOLUTION] ( x page 85)
g [POSITION] menu → [CLOCK PHASE] ( x page 78)
g [POSITION] menu → [SHIFT] ( x page 76)
f Adjust special signals according to the [DISPLAY OPTION] menu → [AUTO SETUP] ( x page 92).
f Automatic adjustment may not be possible depending on the computer model.
f Automatic adjustment may not be possible for the synchronization signal for composite sync or SYNC ON GREEN.
f Images may be disrupted for a few seconds during execution of the automatic setup, but it is not a malfunction.
f Adjustment is required for each input signal.
f Automatic setup can be canceled by pressing the <MENU> button while the automatic setup is being executed.
f Even if a signal possible to perform the automatic setup is being input, it may not be able to adjust correctly if the automatic setup function
is used while the moving image is being input. [INCOMPLETE] may be displayed, or the adjustment may not be completed correctly even if
[COMPLETE] is displayed.
Using the geometric adjustment function
You can correct various types of distortion in a projected image.
Unique image processing technology enables projection of a square image on a special screen shape.
The projected image can be made to look more natural by making topical correction as necessary.
button
1)
Press the <GEOMETRY> button.
f The [GEOMETRY] screen is displayed.
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[KEYSTONE]
[CORNER CORRECTION]
[CURVED CORRECTION]
f Proceed to Step 3) when anything other than [OFF] is selected.
3)
Press the <ENTER> button.
f The [GEOMETRY:KEYSTONE] screen, the [GEOMETRY:CORNER CORRECTION] screen, or the
[GEOMETRY:CURVED CORRECTION] screen is displayed.
Note
f Refer to the [POSITION] menu → [GEOMETRY] ( x page 78) for details.
58 - ENGLISH
Disables the geometric adjustment function.
Adjusts any trapezoidal distortion in the projected image.
Adjusts any distortion in the four corners of the projected image.
Adjusts any curved distortion in the projected image.
Advertisement
Table of Contents
