Table of Contents
Advertisement
3)
Press the <ENTER> button.
f The screen for the selected item is displayed.
4)
Press as to select [FREE GRID].
5)
Press qw to select [ON].
6)
Press the <ENTER> button.
f The [FREE GRID] screen is displayed.
7)
Press as to select [INITIALIZE].
8)
Press the <ENTER> button.
f The confirmation screen is displayed.
9)
Press qw to select [OK], and press the <ENTER> button.
Note
f Each correction data for [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] cannot be initialized at once.
To initialize all the correction data, select each item and execute [INITIALIZE] individually.
f When the projector is initialized by one of the following methods, all data in [FREE GRID] are initialized.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
Chapter 4 Settings — [POSITION] menu
ENGLISH - 83
Advertisement
Table of Contents
