Table of Contents
Advertisement
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The signal level is displayed for 30 bits of input.
Setting [AUTO GAMMA SELECT] in [DIGITAL LINK IN]
Set this item when the gamma mode is to be automatically set based on the InfoFrame information added to the
image signal.
1)
Press as to select [DIGITAL LINK IN].
2)
Press the <ENTER> button.
f The [DIGITAL LINK IN] screen is displayed.
3)
Press as to select [AUTO GAMMA SELECT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Note
f Even if [AUTO GAMMA SELECT] is set to [ENABLE], when the information required for the HDR (High Dynamic Range) support is not
included in the InfoFrame information added to the displayed image signal, the gamma mode is not automatically set and follows the setting
in the [PICTURE] menu → [GAMMA].
Setting [AUTO COLOR SPACE SELECT] in [DIGITAL LINK IN]
Set this item when the color space is to be automatically set based on the InfoFrame information added to the
image signal.
1)
Press as to select [DIGITAL LINK IN].
2)
Press the <ENTER> button.
f The [DIGITAL LINK IN] screen is displayed.
3)
Press as to select [AUTO COLOR SPACE SELECT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Note
f Even if [AUTO COLOR SPACE SELECT] is set to [ENABLE], when the information required for the HDR (High Dynamic Range) support
is not included in the InfoFrame information added to the displayed image signal, the color space is not automatically set and follows the
setting in the [PICTURE] menu → [COLOR SPACE].
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Select this item when the signal output from the HDMI terminal of an external device (Blu-ray disc
player, etc.) is input to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
Select this item when the signal output from the DVI-D terminal or HDMI terminal of an external
device (such as a computer) is input to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable
transmitter.
Select this item when the gamma mode is to be automatically set to the one compatible with HDR (High
Dynamic Range) based on the InfoFrame information added to the image signal. In such case, the
[PICTURE] menu → [GAMMA] is set to [HDR ST2084-500], [HDR ST2084-1000], or [HDR HLG].
Select this item when the gamma mode is not to be automatically set and to specify the gamma mode
with the [PICTURE] menu → [GAMMA].
Select this item when the color space is to be automatically set to the one compatible with HDR (High
Dynamic Range) based on the InfoFrame information added to the image signal. In such case, the
[PICTURE] menu → [COLOR SPACE] is set to [ITU-2020 emu.].
Select this item when the color space is not to be automatically set and to specify the color space with
the [PICTURE] menu → [COLOR SPACE].
ENGLISH - 97
Advertisement
Table of Contents
