Serial In> Terminal - Panasonic PT-FRQ60WU7 Operating Instructions Manual

<SERIAL IN> terminal
The <SERIAL IN> terminal of the projector conforms with RS-232C so that the projector can be connected to and
controlled from a computer.
Connection
When connecting directly
When connecting using DIGITAL LINK compatible device
Projector connecting terminals
DIGITAL LINK
LAN cable (straight)
Note
f The destination of [RS-232C] ( x page 119) must be set according to the connection method.
f When connecting using a DIGITAL LINK compatible device, set the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY
MODE] to [NORMAL] to control the projector in the standby mode.
When [STANDBY MODE] is set to [ECO], the projector cannot be control during standby.
Chapter 7 Appendix — Technical information
Connection request
Sending of key
Sending of command 1
Session 1
Responding to command 1
Disconnection
Connection request
Sending of key
Sending of command 2
Session 2
Responding to command 2
Disconnection
Projector connecting terminals
D-Sub 9p (female)
D-Sub 9p (male)
DIGITAL LINK compatible device
DIGITAL LINK
Server
Computer
Communication cable (straight)
D-Sub 9p (female)
D-Sub 9p (male)
Communication cable (straight)
Computer
ENGLISH - 207