Step 12, Connect Power; Step 13, Start Lcemaker; Step 14, Install Toekick - Monogram ZIS360N Installation Instructions Manual

Installation Instructions
STEP 12} CONNECT POWER
¢ Check to be sure the power cord is plugged into
the receptacle.
¢ Check to make sure power to refrigerator is on by
opening refrigerator door to see if interior lights
are on.
¢ The temperature controls are preset at 37°F for the
fresh food section and 0°F for the freezer.
¢ Allow 24 hours to stabilize before making
adjustments.
STEP 13} START ICEMAKER
Power Switch
<a
Green Power Light
¢ Flip the switch to I (ON). The icemaker will begin
operation automatically.
¢ Be sure nothing interferes with the sweep of the
feeler arm.
¢ Discard the first full bucket of ice cubes.
¢ To turn the icemaker off, set the switch to O
(OFF).
STEP 14| INSTALL TOEKICK
¢ Locate the supplied toekick (shipped taped to
the side of the refrigerator). Install with 2 screws
provided, adjust to desired height and tighten
screws,
¢ A custom toekick can be installed to match or
complement the surrounding cabinetry. Use the
supplied toekick as a template to cut the shape.
Supplied Toekick
a.
coy
Xe
1/4" or Thicker Toekick
tT
"&
%
INSPECT FINAL INSTALLATION
Check door alignment
Stand back away from the refrigerator to inspect the
final installation.
¢ Check to be sure handles are evenly aligned with
each other at the top. To adjust, loosen handle
screws and slide up or down. Tighten screws.
¢ During shipping or the addition of heavy door
panels may have caused the doors to move slightly
out of alignment.
" Door Out of
Alignment
18
— 5/16" Wrench
~ Raise
— nn
¢ If necessary, the fresh food door may be adjusted
up or down to align with the freezer door.
¢ Use a 5/16" wrench to adjust the hinge pin as
shown.