Optional Components; Avaya J100 Phone Display Modes - Avaya J169 Using Instructions

No. Name
1 5V DC Jack
2 Network port
3 PC port
4 Headset Jack
5 Handset Jack
6 WLAN Module Panel
Related links
Phone overview - Avaya J169/J179 IP Phone

Optional components

You can use the following optional components with phone:
Note:
Ensure to use only the phone compatible components.
• PSAC12R–050 – 5V DC Power adapter
• Three JBM24 Button Module or Avaya J100 Expansion Module (JEM24)
• PoE power supply
Related links
Phone overview - Avaya J169/J179 IP Phone

Avaya J100 phone display modes

The Avaya J100 Series IP Phones have three types of phone screen width options:
• Full: In full-width mode, the phone screen shows in full line with the current call. The feature
screen also displays only one feature per line. Use the corresponding line key to select.
• Half: In half-width mode, the phone screen and the feature screen appears in two columns.
Use the adjacent left or right line key to select the call or feature.
• Feature Half: Feature half is a combination of full and half-width modes. The phone screen
appears in full-width mode, and the feature screen appears in half-width mode with two
columns. Use the left or right line key to select.
April 2022
on page 9
on page 9
Using Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
Optional components
Description
To connect the power supply.
To connect the Ethernet cable.
To connect the computer.
To connect the headset.
To connect the handset.
To integrate the Wi-Fi module.
Note:
The Wi-Fi module is not supported in
the Avaya J169 and J179 H.323
phones.
15