I Chapter Page
Adds chapter pages between the pages of copy sets. Since the chapter page is always
copied on one side, this function is useful when you want to divide the copy by chapter.
Original
R E P O R T
Printed chapter page selected in the Cover/Sheet Insertion mode
1
Place your originals, and press "Special Features"
Sheet Insertion."
NOTE
•
When Auto Collate is set to "On," the Collate mode or the Offset Collate mode is
automatically set when you place the originals in the feeder. (See 'Setting Automatic
Collate On/Off,' on p.3-5.)
2
Select the Cover/Sheet Insertion feature you want to use, and press
"Next."
When you select only the Chapter Page mode, proceed to step 4 (when you select "Sheet
Insertion" or "Chapter Page").
You cannot select the "Sheet Insertion" and "Chapter Page" modes at the same time.
NOTE
•
You can cancel a mode by pressing the mode key again.
Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets
Copies
R E P O R T
→
(Cover/Sheet Insertion)
2
press "Cover/
2-7