Table of Contents
Advertisement
1
1-54
Collating Copies (Finisher)
When Saddle Finisher-G1 and
Puncher Unit-K1 are attached,
and Tray A exit slot is not
selected
When you want hole punches made, press "Hole Punch."
When the Finisher-J1 is attached, the saddle stitch position cannot be selected. For details
of the saddle stitch position, see the Reference Guide.
G When you select "Staple," with the Saddle Finisher-G1 attached
→
Press "Next"
select the type of staple ("Corner," "Double," or "Saddle Stitch")
select the staple position.
If "Saddle Stitch" is selected, follow the steps below.
- Press "Next."
→
Advertisement
Table of Contents
