3
Press "Erase."
4
Select a memory key to be erased, and press "Next."
The message appears to confirm that you want to erase the copy job.
IMPORTANT
•
Check the copy settings before you erase them.
NOTE
•
A mode memory key already storing copy settings shows a small, black square (
lower right corner.
•
If you selected a memory key already storing copy settings, the settings are displayed.
•
If there are more stored copy settings than are currently displayed, then you can scroll the
L
M
list using "
" or "
Storing/Recalling Often-used Copy Settings in Memory (Mode Memory)
."
2
I
) in the
2-55