Table of Contents
Advertisement
4
Press "XY Zoom."
5
Enter each value for both the original and copy size, after pressing
"X" (horizontal direction) and "Y" (vertical direction). Then press
"OK."
When entering values in millimeters, you can use
numbers and
(Clear) to clear your entries.
The display returns to the Basic Features screen, and the selected copy ratio is displayed.
If the copy ratio is less than 25%, a message appears telling you that the copy ratio will be
adjusted to 25%. If it is more than 800%, a message appears telling you that the ratio will
be adjusted to 800%.
NOTE
•
When the ratio is larger than 400%, place the original on the platen glass.
•
If you make a mistake when entering values, press "C," and enter the correct value.
•
To set the same values for the X and Y axes, press "Zoom."
•
If you want to enter values in millimeters, press "mm."
•
For details of how to enter the values in inches, see the Reference Guide.
-
(numeric keys) to enter
Changing the Copy Ratio (Copy Ratio)
1
1-39
Advertisement
Table of Contents
