Table of Contents
Advertisement
G When you select "Left Margin" or "Right Margin":
Use "–" or "+" to set the margin for the front and back (0" to 13/16" or 0 to 20mm).
Then press "OK," and press "Done."
The specified mode is set and the screen returns to the Basic Features screen.
G When you select "Top Margin" or "Bottom Margin":
Use "–" or "+" to set the margin (1/16" to 13/16" or 1 to 20mm)
press "Done."
When entering values in millimeters, you can use
The specified mode is set and the screen returns to the Basic Features screen.
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears in the screen.
3
Press
(Start).
Copying starts.
NOTE
To cancel the setting, press "Special Features" → "Margin" → "Cancel," in this order.
•
•
To cancel all settings and return the machine to the Standard mode, press
→
-
(numeric keys) and
Making Copies with Margins (Margin)
2
→
press "OK"
(Clear).
(Reset).
2-25
Advertisement
Table of Contents
