Table of Contents
Advertisement
When scanning two-sided originals, press "2-sided Original."
Select the type of two-sided original, and press "OK."
- Do not forget to set or cancel the Two-sided Original mode according to the type of
originals.
Repeat this operation as necessary.
5
After the last original is scanned, press "Done."
NOTE
To cancel the setting, press "Special Features" → "Job Build," in this order.
•
•
To cancel all settings and return the machine to the Standard mode, press
Copying Separately-set Originals (Job Build)
2
(Reset).
2-47
Advertisement
Table of Contents
