Dividing an Original into Equal Sections and Enlarging
Each Section on a Separate Copy Sheet
This mode automatically divides an original into equal sections and copies each section in
an enlarged form on a separate sheet of paper.
The following four types of Image Separation features are available: 1 to 2 (1-sided and 2-
sided copies), and 1 to 4 (1-sided and 2-sided copies).
IMPORTANT
•
When the machine is operating in the Image Separation mode, you cannot use the Entire Image,
Two-sided, Two-page Separation, Cover/Sheet Insertion, Booklet, Transparency Interleaving,
Saddle Stitch, Frame Erase, Different Size Originals, Image Combination, or Image Repeat
modes.
•
Originals copied in the Image Separation mode must all be the same size. You cannot use the
Different Size Originals mode in combination with the Image Separation mode.
•
Place the original on the platen glass. You cannot copy the original in the Image Separation mode
from the feeder.
NOTE
•
The enlargement ratio is automatically set to match the designated paper size.
I 1 to 2
Divides a one-sided original into two equal sections and outputs the sections in an
enlarged form as two 1-sided copies or one 2-sided copy.
Original
1
NOTE
•
You can place LTR-size originals horizontally or vertically when using this feature. When placed
vertically, each page is divided into upper and lower sections.
Dividing an Original into Equal Sections and Enlarging Each Section on a Separate
2
(Image Separation)
or
1
2
Copy Sheet (Image Separation)
2
Copies
1
2-39