Table of Contents
Advertisement
IMPORTANT
•
When you select "Auto XY Zoom," you cannot use <Auto> for a paper size. If no paper size
is specified, the copy ratio is automatically set to the size of the paper in the top paper
drawer.
NOTE
•
If you make a mistake when entering values, press " C," and enter the correct value.
•
When you select "Auto XY Zoom" in the following cases, <X: Auto%> and <Y: Auto%> are
displayed as the copy ratios in the Basic Features screen.
- When the original is placed in the feeder
- When the original whose size cannot be detected is placed on the platen glass
5
Press
(Start).
Copying starts.
NOTE
•
To return the copy ratio to 100%, press "Direct."
To cancel the setting, press "Copy Ratio" → "Other Zoom" → "XY Zoom" → "Cancel," in this
•
order.
•
To cancel all settings and return the machine to the Standard mode, press
Changing the Copy Ratio (Copy Ratio)
1
(Reset).
1-43
Advertisement
Table of Contents
