Table of Contents
Advertisement
2
Press "Collate," and press "OK."
When Saddle Finisher-G1 and
Puncher Unit-K1 are attached,
and Tray A exit slot is selected
When Saddle Finisher-G1 and
Puncher Unit-K1 are attached,
and Tray A exit slot is not
selected
When you want hole punches made, press "Hole Punch."
G When you select "Rotate":
When the Automatic Paper Selection mode is set, press "Next"
LTRR, STMT, or STMTR-size paper
Press "OK," as long as:
- Available paper size is selected manually.
When Finisher-J1 is attached
When Finisher is not attached, or
when only Inner 2way Tray-A1 is
attached
→
press "OK."
Collating Copies (Finisher)
1
→
select LTR,
1-49
Advertisement
Table of Contents
