Table of Contents
Advertisement
2
2
3
4
2-46
Copying Separately-set Originals (Job Build)
Press "Job Build," and press "Done."
The specified mode is set and the display returns to the Basic Features screen.
Press
(Start).
Scanning starts.
NOTE
•
To cancel scanning, press "Cancel" or
When scanning is completed, place the next original, and press
(Start).
Change the scan settings before pressing
- You can adjust the exposure and the image quality. (See 'Adjusting Exposure and Image
Quality,' on p.1-22.)
- You can change the setting of the original type (i.e., One-sided/Two-sided). (See 'Entering
the Copy Quantity,' on p.1-15.)
- You can change the number of copy sets. (See 'Entering the Copy Quantity,' on p.1-15.)
(Stop).
(Start), if necessary.
Advertisement
Table of Contents
