Canon MG2100 Series Simplified Service Manual page 12

2) Auto tab
The selected item(s) are performed automatically in series, and the test results are indicated.
Special notes:
- The Auto tab (one-click full inspection mode) is to check a series of basic operation of the
machine after repair, and it is not suitable to see if a specific problem pointed out by a user is
repaired.
- DO NOT use the test on this tab to confirm that the user complaints are resolved.
- The tests of LAN, WLAN, Card Board, and PictBridge examine electric connection, and do not
examine the functionalities. Thus, the test results do not guarantee the functions themselves.
No. Name
1 Test Print
2 EEPROM
3 Copy
4 ADF Copy
Function
Service test print
EEPROM information print
Copy test
Copy test from the ADF
Set a sheet of A4 or Letter sized paper in the front tray.
The Service Test Pattern will be printed.
Printed items:
- Model name
- ROM version
- USB serial number
- Process inspection information
- Barcode (model name + destination + machine serial
number)
Note: For the MG2200 series, MG3200 series, and MG4200
series, a new Service Test Pattern is adopted. For
details, see 3-6, "New Service Test Pattern."
Set a sheet of A4 or Letter sized paper in the front tray.
Select Cassette for Parameter1.
The EEPROM information will be printed to check the
following items:
- Model name
- ROM version
- Ink absorber counter value
- Print information
- Error information, etc.
Set a sheet of A4 or Letter sized paper in the front tray,
and select Cassette for Parameter1.
Set the document to be copied on the platen glass.
Not used. "skip!" will be displayed when selected.
(12/34)
easyfixs.blogspot.com
Remarks