Canon MG2100 Series Simplified Service Manual page 11

No. Name
5 Auto Cleaning
6 Cleaning
7 Deep Cleaning
8 EEPROM Save
9 Panel Check
10 Set Destination
11 Clear Ink Counter
12 Ink Absorber
Counter
Function
Enabling / disabling of
automatic print head
cleaning
Print head cleaning
Print head deep cleaning
EEPROM information
saving
Button and LCD test
Destination settings
Ink absorber counter
resetting
Ink absorber counter setting See (3) < Ink absorber counter setting > below.
Automatic print head cleaning prior to printing (after
replacement of an ink tank or the print head). Select this
option to enable the cleaning.
- MG2100 series, MG3100 series, MG4100 series:
Not available
- MG2200 series, MG3200 series, MG4200 series:
The manual print head cleaning is performed.
Cleaning of both Black and Color at the same time (same
as the one in the printer driver)
The EEPROM information (same as the one in EEPROM
information print) is displayed on the PC or is saved to
the PC as a text file. This function is not available in most
cases of errors.
See (3) < Button and LCD test > below.
Select the destination, and click Set.
ASA, AUS, BRA, CHN, CND, EMB, EUR, JPN, KOR,
LTN, TWN, USA
Set a sheet of A4 or Letter sized paper in the front tray.
Select one of the options (listed below) from the
pull-down menu, and click Set. After the ink absorber
counter is reset, the counter value is printed
automatically.
- Main_Black:
Resets the main ink absorber counter for Black
- Main_Color:
Resets the main ink absorber counter for Color
- Platen_Away:
Resets the counter of the platen ink absorber
opposite to the home position
- Platen_Home:
Resets the counter of the platen ink absorber on the
home position side.
- All:
Resets all the four ink absorber counters.
(11/34)
easyfixs.blogspot.com
Remarks