Canon MG2100 Series Simplified Service Manual page 25

9) Remove the HS door (2 screws).
10) Remove the cap blade unit (4 screws, 2 tubes).
Tube
11) Release the two claws and tube, then take out the Ink Absorber Cover with the Ink Absorbers fitted in.
12) Replace the three sheets of ink absorbers in the bottom unit.
QC3-6072 (MG2100/MG3100/MG4100 series)
QC4-6099 (MG2200/MG3200/MG4200 series)
13) Replace the ink absorbers in the Ink Absorber Cover to the new ones, and install them in the machine.
(For replacement procedures, see (1) Easy Replacement, step 3).)
14) Install and attach the cap blade unit, HS door, scanner middle frame, and right side cover.
Tube
Tube
Ink Absorber Cover + Ink Absorbers
(25/34)
QC3-6074 (MG2100/MG3100/MG4100 series)
QC4-6100 (MG2200/MG3200/MG4200 series)
QC3-6073 (MG2100/MG3100/MG4100 series)
QC4-6098 (MG2200/MG3200/MG4200 series)
easyfixs.blogspot.com