Cycles
of LED
Error
blinking
3 times Line feed error
6 times Internal
temperature
error
7 times Ink absorber
almost full
- Main (Black)
- Main (Color)
- Platen (home
position)
- Platen (away)
8 times Print head
temperature rise
error
Error
*1
code
[6000] P03 (1) Foreign material in the LF drive (gear):
-> Remove foreign material.
(2) Smearing, scratches, or conditions of the LF slit
disk:
-> Clean and re-attach the LF slit disk.
If the disk is damaged, replace the timing slit
strip film.
If the disk is coming off, replace it to a new one
(since the double-sided adhesive tape is
deteriorated).
(3) LF motor harness condition (wrong or imperfect
connection, connection at an angle, damage,
etc.):
-> Re-connect the harness.
If the harness is damaged, replace the LF
motor. Note that the LF motor is not
designated as a service part.
(4) Deformation or damage to the LF roller and LF
drive gears:
-> If they are deformed or damaged, replace
them. Note that the LF rollers and the LF drive
gears are not designated as service parts.
(5) If the error still occurs:
-> Replace the part(s) listed on the right (under
"Parts to be replaced if the listed solutions are
not effective").
[5400] P06
-> Replace the part(s) listed on the right (under
"Parts to be replaced if the listed solutions are
not effective").
P07 (1) Ink absorber:
-> Replace the applicable ink absorber (absorber
kit), and reset its counter value.
[5B02]
See 3-2, Main Ink Absorber Replacement, for
[5B03]
details.
[1704]
[5B05]
[5B12]
[5B13]
[5B14]
[5B15]
[5200] P08 (1) Ink level:
-> Check the remaining ink amount, and replace
the ink cartridge with sufficient ink when
necessary.
(2) Head contact pin condition of the carriage unit:
-> Remove any foreign material.
If the pin is bent or deformed, replace the
carriage unit.
(3) If the error still occurs:
-> Replace the part(s) listed on the right (under
"Parts to be replaced if the listed solutions are
not effective").
Check points & Solution
(7/34)
easyfixs.blogspot.com
Parts to be replaced if
the listed solutions
are not effective
- Carriage unit
- Logic board ass'y
- Logic board ass'y
- Logic board ass'y