Table of Contents
Advertisement
Sleep mode
The device can be made to either sleep or switched off. When the device is in sleep mode, it
uses very little power and starts instantly when the ON/OFF button is pressed. When in sleep
mode, the battery status LED lights green. The duration required before the device enters
sleep mode is set under Power Manager in device settings.
Power supply
The device has an internal, rechargeable battery. To charge, connect the device to a mains sup-
ply via the provided charger/adapter. The charger/adapter is connected to the charging socket
(refer to images above and below). The battery status LED lights green when charging. The
battery capacity is shown on the right top corner of the display.
Charge the non-removable battery only with the supplied charger/adapter. Follow the
l
safety instructions supplied with the charger.
Maximum charge temperature is 40°C (104°F).
l
Do not deep discharge the battery (<15%).
l
Observe the storage and transport conditions given in Handling precautions.
l
Shoulder and hand straps
A shoulder strap and two hand straps are provided with VIBXPERT 3 to give more comfort
when the device is used to measure extended routes.
VIBXPERT 3
On-board help
17
Advertisement
Table of Contents
