Table of Contents
Advertisement
l
From the properties screen, tap the meatball menu
l
Select belt drive, then tap the meatball menu
VIBXPERT 3
Tap
(
) to specify the correct machine properties.
Shows selected machine; in this example, the motor.
Shows the shaft connections for the machine. Standard
machines like motors and blowers have a single shaft
connection. Belt drives have two shaft connections. In
this example, the motor shaft is connected to the belt
drive (PulleyB).
Shows a second shaft connection. In this example, their
is only one shaft connection. Thus, the second shaft con-
nection is set off.
Tap APPLY to confirm edited properties.
and edit the machine properties.
and edit the belt drive properties.
On-board help
57
Advertisement
Table of Contents
