Table of Contents
Advertisement
On-board help
Note:Asset RPM measured with the keyphasor can be started directly from the home
screen. Use the Speed measurement application.
Machine and/or asset speed can be measured and/or confirmed with the three options avail-
able in the speed measurement application. The three options are: keyphasor; stroboscope;
manual entry.
The options can be accessed as follows:
Use the speed measurement application available on the home screen.
l
Use the measurement screen context menu item Speed / strobe.
l
If the measure setting Machine speed finder is on, a hint to verify or measure speed is
l
shown. If hint is followed, the three options are available.
Temperature
Get the temperature at a measure location with a temperature probe then enter this value in
the device.
66
Version:1.0
Advertisement
Table of Contents
