Table of Contents
Advertisement
On-board help
not switch off.
Show battery percentage — when on (
), shows the battery capacity percentage
on the top-right corner of the display. When off (
) only the battery icon is shown.
About: used to edit the name of the device, show device serial number, storage capa-
l
city, firmware and hardware versions, calibration due date, registered applications, legal
information and licenses, and reset device to factory settings.
Device name — tap
then use the alphanumeric keyboard and edit the name of the
device. Tap APPLY CHANGES to confirm changes. The device name is shown when the
device is connected to a PC.
Registration information — shows licensed applications. Select Registration inform-
ation > ENTER KEY AND CODE, then use the numeric keypad and enter the provided
registration code. Tap APPLY CHANGES to complete registration and activate the
licensed applications.
Legal information — shows necessary legal and open source software information.
Tap Legal information to see the information. Tap NEXT to go through the pages. Tap
BACK to leave the pages.
Reset to factory settings — used to go back to default settings.
Note:If this step is done, all data and settings on VIBXPERT 3 will be deleted.
Tap Reset to factory settings. A hint is shown that warns that data will be deleted.
Tap ENTER CODE and enter the code shown in the on-screen keyboard window.
22
Version:1.0
Advertisement
Table of Contents
