Table of Contents
Advertisement
On-board help
l
Tap NEXT then
select the balancing procedure.
l
Select necessary balancing mode. Tap the plane toggle (
ancing. When 2-plane balancing is selected, the measure locations can then be posi-
tioned on the necessary plane. Tap APPLY to confirm selections
Mount the sensors as necessary then connect them to the applicable VIBXPERT 3 inputs.
l
114
The selected measure locations are shown with a darker
measure location icon (
a grayed out icon (
Shows the device measure channels that will be used for
the balancing procedure.
Shows live sensor data. In this example, the sensors
have been already connected to the device.
Shows the measured machine speed.
to show the influence setup window. This window is used to
). Locations not selected have
).
) and select 2-plane bal-
Version:1.0
Advertisement
Table of Contents
