Table of Contents
Advertisement
On-board help
Shows balancing screen.
Tap
(
) to set necessary parameters for balancing
procedure. The shown parameters can be set.
Note: The item Type is used to select the amplitude
parameter that is used in the balancing measure screen.
If measured data is available, the data can be entered
manually as amplitude and phase values in the bal-
ancing measure screen. To do this, the option Enter
must be turned on (indicated by
).
user data
After the necessary parameters have been set, tap
APPLY to confirm set parameters.
– icon shows available measure location. When the
location is selected to measure balancing, the icon
becomes darker (
).
112
Version:1.0
Advertisement
Table of Contents
