Table of Contents
Advertisement
On-board help
Mount the sensors as necessary then connect them to the applicable VIBXPERT 3 inputs.
l
Switch the machine on. Wait until the machine has reached the balancing RPM and oper-
l
ating temperature if necessary.
106
The selected measure locations are shown with a darker
measure location icon (
a grayed out icon (
Shows the device measure channels that will be used for
the balancing procedure.
Shows live sensor data. In this example, the sensors
have been already connected to the device.
Shows the measured machine speed. In this example,
the laser trigger sensor has been mounted on the
machine and connected to the device, but the machine is
switched off.
Shows current balancing step; in this case it is the first
step which is initial run.
). Locations not selected have
).
Version:1.0
Advertisement
Table of Contents
