Table of Contents
Advertisement
Select the locations to measure for the balancing procedure.
l
Note:Before the laser trigger sensor and the vibration sensors are mounted and
connected to VIBXPERT 3 make sure that all preparations for the procedure have
been correctly done.
VIBXPERT 3
Tap
to show the vibration and displacement para-
meters that can be selected to be shown live on the dis-
play (
). Default parameters are set in the
Measurement setting Sensor Live Values, and can be
changed here. A maximum of two parameters for can be
shown on the screen.
Shows live data from connected sensors. Values shown
only when sensor live data (
Shows sensor live data on. When switched off (
no values are displayed in
Shows screen hint. This hint is related to present action.
The NEXT button is active only when all necessary con-
ditions are correct. In this example, the hint
an incorrect condition and as a result, the button is inact-
ive.
Tap
to show machine measure steps.
) is turned on (
.
shows
On-board help
).
)
105
Advertisement
Table of Contents
