Honda VFR800F 2014 Service Manual page 49

FRAM E/BODY
PAN
ELS/EXHAUST SYSTEM
MIDDLE
LEFT PANEL
Remove the four
trim cllps [1] and socket bolt
[2].
Release the lower side of the lower panel [3] from
the
two
tabs
[4] and the two
upper tabs
[5],
and remove the
inner lower panel.
lnstallation
is
in
the
reverse order of removal.
COWL
REMOVAL/INSTALLATION
Remove the following:
-
radiator grille (page 2-5)
-
inner lower panel (page 2-5)
-
under cowl (page 2-4)
Remove the following fasteners:
-
trim
clip
[1]
-
two 5 mm socket
bolts
[2]
-
5 mm socket bolt [3] and plastic
washer
[4]
-
6 mm socket bolt
[5]
Release
the boss [6] from the
grommet
and the
four
tabs [7] from the inner upper panel.
Slide
the
middle cowl [8] forward to
release the
four
tabs
[9]
and remove
it.
lnstallation is
in
the
reverse order of removal.
NOTE:
.
Place the
middle cowl opening over the
oil pipe.
.
Be careful not to dislodge the grommet.
.
Before
installing the fasteners,
be sure to set all ihe
tabs into place properly.
2-6